Wireless Remote Controller; Parts Name Of Remote Controller - Toshiba RAV-SM566KRT-E Owner's Manual

4

Wireless remote controller

4-1. Parts name of remote
controller
Wireless remote controller
and its functions
1
4
PRESET FAN
13 5
TEMP
2 MODE 3
COMFORT
QUIET SLEEP
16 15
6 12
SWING FIX H i -POWER
7 11
TIMER CLR
10
14 ON OFF
SLEEP SET
9 8
CHK FILTER CLOCK
1
Infrared signal emitter
Transmits a signal to the indoor unit.
2
START/STOP button
Press the button to start operation.
(A receiving beep is heard.)
Press the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
press the button twice.
3
Mode select button (MODE)
Press this button to select a mode.
Each time you press the button, a mode is
selected in a sequence that goes from A : Auto
changeover control, : Cool, : Dry,
: Fan only, and back to A. (A receiving beep is
heard.)
11-EN
4
Temperature button ( )
TEMP
...... The set temperature is increased up to
TEMP
30 °C.
...... The set temperature is dropped down to
TEMP
17 °C. (A receiving beep is heard.)
5
Fan speed button (FAN)
Press this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed from among five settings.
+
(LOW , LOW , MED ,
+
MED , HIGH )
(A receiving beep is heard.)
6
Auto louver button (SWING)
Press this button to swing the louver.
(A receiving beep is heard.)
Press the SWING button to stop the louver
swinging.
(A receiving beep is heard.)
7
Set louver button (FIX)
Press this button to adjust the airflow direction.
(A receiving beep is heard.) While this button is
kept depressed, the receiving tone continuously
sounds.
8
Off timer button (OFF)
Press this button to set the OFF timer.
9
On timer button (ON)
Press this button to set the ON timer.
10
Reserve button (SET)
Press this button to reserve time settings.
(A receiving beep is heard.)
11
Cancel button (CLR)
Press this button to cancel ON timer and OFF
timer. (A receiving beep is heard.)
12
High power button (Hi POWER)
Press this button to start the high power operation.
This function is not operated group control.
: Heat,
13
PRESET button
Press this button to change the operation mode to
the preferred operation mode memorized
previously. To memorize the operation mode,
press this button for at least 3 seconds during the
preferred operation mode. is displayed and the
operation mode is memorized.
14
SLEEP button
Press this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed.
You can select the OFF timer time from four
durations (1, 3, 5 or 9 hours).
15
COMFORT SLEEP button
Press this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed.
You can select the OFF timer time from four
durations (1, 3, 5 or 9 hours).
During group control operation, the set
temperature and the fan speed are not
automatically adjusted. Only off timer function is
activated.
16
QUIET button
Press this button to start quiet operation.
Pressing this button again will restore normal
operation.
– 6 –
Names and functions of
indications on wireless
remote controller
◆ Display
All indications, except for clock time indication, are
indicated by pressing the START/STOP button.
1 3 2
10
8
7
9
5
6 4
• In the illustration, all indications are indicated for
explanation.
During operation, only the relevant indications will be
indicated on the remote controller.
1
Transmission mark
This transmission mark ( ) indicates when the
remote controller transmits signals to the indoor
unit.
2
Mode display
Indicates the current operation mode.
(A : Auto changeover control, : Cool, : Dry,
: Heat, : Fan only)
3
Temperature display
Indicates the temperature setting (17 °C to 30 °C).
When you set the operating mode to : Fan only,
no temperature setting is indicated.
4
FAN speed display
Indicates the selected fan speed. AUTO or one of
+
five fan speed levels (LOW , LOW ,
+
MED , MED , HIGH
can be indicated.
Indicates when the operating mode is
Dry.
5
TIMER and clock time display
The time set for timer operation or clock time is
indicated.
The present time is always indicated except for
TIMER operation.
6
Hi POWER display
Indicates when the high power operation starts.
Press the Hi POWER button to start and press it
again to stop the operation.
EN
)
:
12-EN