Note - Vantec Motion Master User Manual

Motion detection car recorder
Table of Contents

Advertisement

5-6. Note

1.
This device requires a TF card to save any videos and photos. You will not get the fully function if there
are not TF card in the device.
2.
The DVR function enable loop recording of videos, when the storage is full, DVR will automatically record
newer content and overwrite the older file. During the overwrite process, there is a blind spot (unrecord-
ed) for about 3 seconds. During this blind spot the DVR will stop recording content for about 3 seconds.
3.
Please use the provided USB car charge for this DVR, this car charger is will adapt the 12V/24V and step
down to 5V. If the wrong adapter is used and the output voltage is greater than 5V, it will damage the
DVR.
23

Advertisement

Chapters

Table of Contents
loading

Related Products for Vantec Motion Master

Table of Contents