TABLE OF CONTENTS 1. Introduction 1-1. Welcome 1-2. Getting Started 2. Getting to know the Vantec Car Camera DVR 2-1. Specifications 2-2. Front Panel 2-3. Back Panel 2-4. Top Panel 2-5. Package Contents 3. Connecting 3-1. Power/Charge connection 3-2. Computer connection 3-3.
Page 4
4-2. Video features 4-3. Camera function 4-4. Play Back function 4-5. G-Sensor-Collision Sensing Capabilities 4-6. Bluetooth 4-6-1. Turn ON/OFF Bluetooth 4-6-2. Pairing the Bluetooth phone 4-6-3. Bluetooth Functional Description Answer phone call (Bluetooth Key) Hang up the phone (Bluetooth key) Reject phone call (Bluetooth key) Redial the last phone number (MENU OK button) Volume Control (UP and DOWN Key)
Page 5
5. Configuration of Function and Tools Setting 5-1. Configure Function Setting 5-2. Video Mode Function Setting 5-3. Camera Mode Function Setting 5-4. Play Back Mode Function Setting 5-5. Configure Tools Setting 5-6. Note...
This device uses Standard interface like USB, HDMI, 12/24V Car Charger, and TF card to simplify usage. 1-2. Getting Started The Vantec Car Rear View Mirror with Camera Vide Recorder functionality is broken down into 4 modes of function. They are Video mode, Camera mode, Playback mode and Bluetooth function. Video Mode : Recording of video using the mounted video camera.
2. Getting to know the Vantec Car Camera DVR 2-1. Specifications Master chip : NT96632 Camera Lens/Sensor : OV9712 Video Specifications : 1080P, 720P, VGA Bluetooth chip : LI-85SPK01 Led Lamp : Night vision, super infrared lights X4 Display : 2.7HD TFT...
Page 8
2-1. Specifications Image format : JPEG HDMI : support Operation power consumption : 500MA~700MA Static electric current : 10uA Standard voltage : DC 5V Storage temperature : -20℃~60℃ Operation temperature : -10℃~60℃ Operation humidity : 15-65% RH USB interface : USB 2.0 Dimension : 325 x 92 x 45 mm...
2-2. Front Panel Bluetooth – The multi-function buttons serves as an ON/OFF for Bluetooth capability, accept, hang up, reject calls, and transfer to phone functions. Scroll UP – Directional function to scroll through the menu, Zoom in, previous view. Scroll DOWN –...
2-3. Back Panel Reset Button Camera – The reset button will cause the device to – This Camera serve as a video camera and still default all setting back to factory default setting. (photo) picture camera. The camera can be adjusted to limited angle to record videos.
2-4 Top Panel Micro HDMI Port Mini USB Ports – Use for playback videos/photos. This – This Mini USB Port serve two purposes. It requires an optional HDMI cable to connect to a TV for viewing. is use for charging/Powering this device or for connecting to a computer system to retrieve video/photos.
3. Connecting There are 3 ports on this device. They are Mini HDMI, USB and AVout port. The Mini HDMI port is use for connecting this device to your HDTV to preview the content of the TF card. The Mini USB port serves two functions: 1) to charge and provide power to the device;...
3-3. HDTV and AVout connection The device Mini HDMI port can be used to link to a HDTV for preview of your videos and photos. You can also use the composite AVout port to view on TV.
4. Operations 4-1. Getting Started Do not setup this device while driv- Before using the device, please ing or while the vehicle is in motion. insert a TF card into the TF card slot Please stop at a safe place before located on the top of the device.
4-2. Video feature Press the power button or connect the USB car charger, DVR will automatically enter the recording mode. If you see a red dot blinking on the top left corner of the screen, it is in recording mode. In the recording state the videos are save in the TF card in AVI file format.
2) Place your phone within a meter in distance from the Car Camera DVR. 3) Set your phone Bluetooth to “Discovery mode”, it will automatically detect the Bluetooth device “Vantec” 4) Select the “Vantec” Bluetooth device and perform the Pairing per the instruction of your phone.
4-6-3. Bluetooth Functional Description Answer phone call (Bluetooth key) When you get an incoming call, a short press on the Bluetooth key will answer the call. Hang up the phone (Bluetooth key) While in a call, a short press on the Bluetooth key will hang up the call. Reject phone call (Bluetooth key) When you cannot answer and like to reject a call, press and hold the Bluetooth key for 3 seconds when it is ringing.
4-7. Download Videos and Photos You can connect a USB connection between the device and your computer to download Videos and Photos stored in the TF card. Once connected you should see a selection for Mass Storage or PC Camera. Select Mass Storage and you should be able to browse the folders for the videos and photos saved on the TF card.
5. Configuration of Function and Tools Setting 5-1. Configure Function Setting To enter the Function Setting Menu, turn on the DVR and stop video recording if it is in recording mode. You can switch to different mode by pressing the Mode key. If you are in Video Mode, when you press the Menu key, it will bring up the Video Function Setting menu.
5-2. Video Mode Function Setting Video Setting Menu Video Mode Record Video Zoom + Zoom - Start/stop recording Hold to switch Day/Night mode Video Setting Menu Video Resolution Cyclic Record Motion Detection G Sensor Set Date Stamp Audio...
5-3. Camera Mode Function Setting Camera Mode Camera Setting Menu Take Still Picture Zoom + Zoom - Take picture Hold to switch Day/Night mode Camera Setting Menu Capture Mode Resolution EV Q uality Sharpness White Balance Color Date Stamp Quick Review Anti-Shaking Face Detection...
5-4. Play Back Mode Function Setting Play Back Mode Library Setting Menu List libraries of videos and phots Preview previous Preview next Video Play Back << Speed >> Speed Photo Play Back Library Setting Menu Hold to set Volume Delete Protect Thumbnail...
5-5. Configure Tools Setting The Tools Setting for all three modes are the same. Press the Menu key again while in the Function Setting Mode will bring you to the Tools Setting. Date/Time Beep Sound Frequency Volume Language TV Mode Default Setting Format Version...
5-6. Note This device requires a TF card to save any videos and photos. You will not get the fully function if there are not TF card in the device. The DVR function enable loop recording of videos, when the storage is full, DVR will automatically record newer content and overwrite the older file.
4-6-3. 藍牙功能 接聽電話 ( Bluetooth 鍵) 按下 Bluetooth (藍牙鍵)可接聽電話。 結束通話 ( Bluetooth 鍵) 在通話狀態中,按下 Bluetooth (藍牙鍵)即可掛斷電話。 拒接來電 ( Bluetooth 鍵) 持續按住 Bluetooth (藍牙鍵)3秒鐘,即可拒接來電。 重播最後一組電話號碼 ( MODE 鍵) 長按 MODE (模式鍵),可重播最後一組電話。 音量控制 (UP 與 DOWN 鍵) 在通話狀態下,可使用 UP (上鍵)增加音量和 DOWN (下鍵)來減小音量。 切換免持聽筒...
5-2. 視訊模式功能設定 視訊模式選單 Video Mode Record Video 放大 縮小 開始/停止錄影 長按切換至日/夜間模式 視訊模式選單 Video Resolution Cyclic Record Motion Detection G Sensor Set Date Stamp Audio Video Resolution : 影像解析度 Audio : 錄音 EV : 影像曝光值 Date Stamp : 日期紀錄 Cyclic Record : 循環錄影 G Sensor Set : G Sensor 設定...
5-3. 拍照模式功能設定 Camera Mode 拍照模式選單 Take Still Picture 放大 縮小 拍照 長按切換至日/夜間模式 拍照模式選單 Capture Mode Resolution EV Q uality Sharpness White Balance Color Date Stamp Quick Review Anti-Shaking Face Detection Capture Mode : 拍照模式 White Balance : 白平衡 Anti-Shaking : 防手震 Resolution : 相片解析度...
5-5. 配置工具設定 配置工具設定在三種模式下皆相同,當在模式功能選單中再度按下 MENU 鍵即可進入配置工具設定頁 面。 Date/Time Beep Sound Frequency Volume Language TV Mode Default Setting Format Version Bluetooth Screen Savers Date/Time : 設定 日期/時間 顯示格式 Volume : 音量設定 Format : 將 TF 卡格式化 Auto Power OFF : 可設定於X分鐘後自動關機 Frequency : 支援 50Hz 或 60Hz Screen Savers : 設定螢幕保護畫面啟動時間...