Bluetooth; Turn On/Off Bluetooth; Pairing The Bluetooth Phone - Vantec Motion Master User Manual

4-6. Bluetooth

The Bluetooth function on this Car Camera DVR provide a hand free function when link to your phone. You
can perform basic phone function like answering, rejecting calls, volume control and transferring call to your
phone. To use the Bluetooth function, you have to enable the function and pair your phone to use the function.

4-6-1. Turn ON/OFF Bluetooth

To turn ON the Bluetooth function, while Car Camera DVR is in VIDEO MODE, press and hold the Bluetooth key
for 2 seconds, the Bluetooth icon will show on the Display Screen of the Car Camera DVR.
To turn OFF the Bluetooth function, while Car Camera DVR is in VIDEO MODE, press and hold the Bluetooth key
for 2 seconds, the Bluetooth icon will no longer displayed on the Display screen of the Car Camera DVR.
When the Bluetooth function is turn ON but it is not paired with a phone, it will display a Gray icon

4-6-2. Pairing the Bluetooth phone

To Pair your phone to the Bluetooth, follow the simple steps below:
1) Turn ON the Bluetooth functions on the Car Camera DVR mention in the previous section on "Turning ON/
OFF Bluetooth".
2) Place your phone within a meter in distance from the Car Camera DVR.
3) Set your phone Bluetooth to "Discovery mode", it will automatically detect the Bluetooth device "Vantec"
4) Select the "Vantec" Bluetooth device and perform the Pairing per the instruction of your phone.
Some model of the phone may require to enter a pairing password, If it is required, please enter "0000"
15