Operations; Getting Started - Vantec Motion Master User Manual

4. Operations

4-1. Getting Started

If you have important data on the TF card, please back up the data
before you use the format function to erase and reformat the TF card.
Once you TF card have been formatted, you are ready to set the Video/Camera for recording or taking still picture.
Before using the device, please
insert a TF card into the TF card slot
located on the top of the device.
Press the power ON/OFF button or
connect the USB car charger, the
DVR will automatically power ON.
Press the Menu Key twice to select the Tools Setting Menu.
Use the Up and Down Key to maneuver to the Format
Menu, Press OK (Confirm) selection to format the TF card
to get it ready for use. Select OK to format the TF card.
13
Do not setup this device while driv-
ing or while the vehicle is in motion.
Please stop at a safe place before
adjusting or installing this device.