Configuration Of Function And Tools Setting; Configure Function Setting - Vantec Motion Master User Manual

5. Configuration of Function and Tools Setting

5-1. Configure Function Setting

To enter the Function Setting Menu, turn on the DVR and stop video recording if it is in recording mode.
You can switch to different mode by pressing the Mode key.
Within the Function Setting you can Press Up or Down key to select the parameters that you like to change and
press the OK to confirm the selection. When all settings are complete, press the Menu key twice to exit.
If you are in Video Mode, when you press the Menu
key, it will bring up the Video Function Setting menu.
If you are in Camera Mode, it will bring up the Camera
Function Setting menu.
If you are in Play Back Mode, it will bring up the Play
Back Function Setting menu.
18