Vertex Standard VX-2200(LTR) Series Operating Manual page 12

Fm transceivers
Table of Contents

Advertisement

SCAN
The Scanning feature is used to monitor multiple channels programmed into the
transceiver. While scanning, the transceiver will check each group which is pro-
grammed with scan memory "Enabled" for the presence of a signal, and will stop on
a channel if a signal is present.
To activate scanning:
Press (or press and hold) the assigned programmable key to activate scanning.
The scanning radio will search the programmed groups, looking for active ones;
it will pause each time it finds a group on which someone is speaking.
Press (or press and hold) the assigned programmable key again to disable scan-
ning. Operation will revert to the Scan Start Group.
SCAN A/D
Press (or press and hold) the assigned programmable key to delete the Current Memory
Group from the Scanning. When you delete a group, " - SKIP - " will appear on the
display for one second after pressing the assigned programmable key. To restore a
particular group to your scanning list, press (or press and hold) the assigned pro-
grammable key again; " - STOP - " will appear on the display for one second after
pressing the assigned programmable key.
LOW L
P
OW
Press (or press and hold) the assigned programmable key to set the radio's transmit-
ter to the "Low Power" mode. Press (or press and hold) the key again to return to
"High Power" operation when in difficult terrain.
When the radio's transmitter is set to "Low Power" mode, the "
indicated on the display.
10
A
DVANCED
OWER
VX-2200 LTR S
O
PERATION
ERIES
" icon will be
O
M
PERATING
ANUAL

Advertisement

Table of Contents
loading

Table of Contents