Sony PDW-D1 Operation Manual page 47

• Windows XP: "Sony XDCAM
PDW-D1 IEEE 1394 SBP2 Device"
is deleted from the Hardware
devices list.
8
Power the unit off, and then power it
on again.
The line mode selected in step 1
becomes available for use.
To change the line mode setting on
a Macintosh computer
1
Refer to "AV setting operations"
(page 46), and change the line mode
setting.
2
Click the Set button.
If a disc is present, it is automatically
ejected.
3
In the confirmation message box, click
the OK button.
4
Click the "Change Connection" button
to switch to "AVc/Log out."
5
Exit the utility software (see page 39).
6
Power the unit off, and then power it
on again.
The line mode selected in step 1
becomes available for use.
Owner setting
When using an extended UMID, set the
following owner information.
Item name Settings
Country code An abbreviated
alphanumeric string (up
to four bytes
alphanumeric strings)
according to the values
defined in ISO 3166-1.
Item name Settings
Organization A code registered with
code the SMPTE registration
office (up to four bytes
alphanumeric strings)
User code A code for user
identification (up to four
bytes alphanumeric
strings)
Country code
You can find your own country code on the
following web page.
Refer to ISO 3166-1:
http://www.iso.ch/iso/en/prods-services/
iso3166ma/02iso-3166-code-lists/list-
en1.html
Organization code
• Organization codes must be acquired by
applying to the SMPTE registration
office.
• When no organization code has been
acquired, it is forbidden to enter an
arbitrary string. As a rule, the code "00"
must be entered. Freelance operators who
do not belong to an origination should
~
enter " ."
• There are no problems in recording or
playing back audio-video signals, if an
organization code is not set.
User code
• The user code is registered with each
organization locally. It is usually not
centrally registered.
• This user code is determined by the
organization. The methods used depend
on the organization.
• User code cannot be entered when no
organization code has been entered.
Owner information setting
operations
To enter owner information: Using the
keyboard, enter alphanumeric
characters in the edit box for each item.
5-3 Details of Functions 47