Sony PDW-D1 Operation Manual page 45

TIME CODE
Item name Settings
VITC Specify whether or not
to record the VITC
generated by the
internal time code
generator.
ON: Record internally
generated VITC.
OFF: Do not record
internally
generated VITC.
VITC Select whether to output
OUTPUT VITC or the time when a
clip was recorded into
VITC during playback.
VITC: Output VITC.
TIME: Output the time
when a clip was
recorded.
a) This is supported from firmware version 1.4.
VIDEO CONTROL
Item name Settings
a) Specify whether to
WIDE MODE
record with the
addition of wide picture
information.
Sub-item
1 INPUT Specify whether to
save wide picture
information to the disc
during recording.
AUTO: Automatically
ON: Always record
OFF: Do not record
record wide
picture information
when it is detected
in the selected
input video signal.
wide picture
information.
wide picture
information.
a) This is supported from firmware version 1.4
and utility software version 1.10.
AUDIO CONTROL
Item name Settings
DV AUDIO Select the audio
OUTPUT signals to assign to
SELECT i.LINK(AV/C) audio
output channels.
Sub-item
1 CH1/CH2 tr1/2: Tracks 1 and 2
tr3/4: Tracks 3 and 4
tr5/6: Tracks 5 and 6
tr7/8: Tracks 7 and 8
2 CH3/CH4 tr1/2: Tracks 1 and 2
tr3/4: Tracks 3 and 4
tr5/6: Tracks 5 and 6
tr7/8: Tracks 7 and 8
DV OUT Select the audio mode
AUDIO MODE
for S400 (i.LINK)
connector (output).
2ch: 16 bit/48 kHz/2ch
4ch: 12 bit/32 kHz/4ch
5-3 Details of Functions
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 1
and 2.
assigned to audio
output channels 3
and 4.
assigned to audio
output channels 3
and 4.
assigned to audio
output channels 3
and 4.
assigned to audio
output channels 3
and 4.
45