Sony PDW-D1 Operation Manual page 22

Example connection
Laptop computer
a) On a Macintosh computer, to FireWire port
22 3-2 Connections and Settings
1: i.LINK cable (not supplied)
To i.LINK (IEEE1394) connector
In the PC operation settings dialog box of the
utility software, in the FAM operation section,
set "Login" to "Permit" (see page 41).
Note
Pins 1, 3, and 4 of switch S1401 on the rear panel of the unit must be
set to OFF (the factory default setting is OFF) to enable utility
software settings. If any of these pins are in the ON position, return
them to the OFF position.
DC IN
a)
1
-AC IN
S400 (i.LINK)
PDW-D1
S400