Operation And Important Riding Points; Starting The Engine - Yamaha Star XV19SY Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15951
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. To start the engine after a
EWA10271
turnover, be sure to turn the main
switch to "OFF" and then to "ON". Fail-
ing to do so will prevent the engine from
starting even though the engine will
crank when pushing the start switch.
EAU45310

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
G
G
1. Turn the key to "ON" and make
NOTICE
If a warning light does not go off, see
page 4-2 for the corresponding
warning light circuit check.
6-1
The transmission is in the neutral
position.
The transmission is in gear with
the clutch lever pulled and the sid-
estand up.
See page 4-17 for more informa-
tion.
sure that the engine stop switch is
set to " ".
The following warning
should come on for a few seconds,
then go off.
G Fuel level warning light
G
Engine trouble warning light
EAU16244
lights
6
ECA15482