Table of Contents
Advertisement
USE THIS SLOT TO AID
IN POSITIONING TEMPLATE
HOLE #1
USE 11/32" DRILL BIT
1.) CUT OUT TEMPLATE.
2.) ALIGN TOP AND RIGHT EDGE
WIRE LOOP HOLE
OF TEMPLATE AND DRAWBAR.
NEW
USE 9/32" DRILL BIT
3.) TAPE IN POSITION.
4.) MARK AND DRILL HOLE #1
WIRE LOOP HOLE
OLD
5.) ASSEMBLE MOUNTING BRACKET
TO DRAWBAR, USE BRACKET AS
TEMPLATE FOR REMAINING HOLES.
17
Advertisement
Table of Contents
