Selecting The Function Group And Altering The Parameters - Pfaff 3119 Instruction Manual

Input
11

Selecting the function group and altering the parameters

.02
+
-
+
-
or
or
11 - 2
Switch on the machine.
After the machine is switched on, the operational mode Sewing is activated automatically.
By pressing the key activate Operational mode Input (LED in the key is off).
Select the desired function group with the corresponding plus/minus key.
On delivery only the function group "100" has free access, the other function groups are
protected from unauthorised access by a code.
100
+ +
- -
The function group is selected by pressing Enter.
Select the desired parameters and alter the desired value using the corresponding plus/
minus key.
105
+ +
- -
When the Enter key is pressed, the altered value is saved and the next parameter is
selected.
When Operation mode Sewing is selected the altered value is saved and the machine
changes to the operational mode sewing (LED in the key is on).
when the Reset key is pressed the altered value is not saved and the function group
selection is called up.
Made in Germany
+
-
2
Made in Germany
+
-