Motorola DIGITAL WIRELESS TELEPHONE User Manual page 173

In general, the closer you are to a wireless base station, the
lower the power output.
Before a phone model is available for sale to the public in the
U.S. and Canada, it must be tested and certified to the FCC and
Industry Canada that it does not exceed the limit established by
each government for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body)
reported to the FCC and available for review by Industry Canada.
The highest SAR value for this model phone when tested for use
at the ear is 1.54 W/kg and when worn on the body, as
described in this user guide, is 0.43 W/kg. (Body-worn
measurements differ among phone models, depending upon
available accessories and regulatory requirements.)
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
governmental requirements for safe exposure.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://phonefacts.net or the
Canadian Wireless Telecommunications Association (CWTA)
website, http://www.cwta.ca.
In the United States and Canada, the SAR limit for mobile phones
*
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
† The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for
this product.
171