Tray; Humidification Filter Set - Sharp HV-50CXE Operation Manual

CLEANING AND STORAGE

Tray

Clean once every 2 weeks.
Empty the water within the tray.
1
Empty the tray from the direction shown on the
right.
Rinse the tray with water and remove soiling.
2
• Do not remove the float (styrofoam).
• For fine areas, use a cotton swab or tooth
brush to remove soiling.
• Wipe and dry any water on the outside of
the tray.

Humidification Filter Set

Place citric acid in water or lukewarm water (about
1
°
40 C) and allow to dissolve.
Used volume
20g per 3 liters of water of lukewarm water (about 40°C).
Place the humidification filter set and allow to sit.
2
(About 60 minutes)
Do not remove the humidification filter from the hu-
midification filter set.
Use clean water.
3
Repeat 2 or 3 times replacing water each time.
Reattach the humidification filter set in the
4
original state.
• Insufficient rinsing will cause citric acid odors, defor-
mation and discoloration of unit.
• Citric acid is a type of food additive and is not harm-
ful to the human body. However, store in a location
that is out of the reach of children.
• Citric acid can be purchased at your local pharmacy
or pharmaceutical store.
Replacement guide for humidification filter.
• Replace the humidification filter even within 6 months if any of
the following is noticed:
Discoloration (black or yellow), stubborn dirt or white hardened
substances that cannot be removed even when cleaning.
Filter is damaged or is badly out of shape.
• Dispose of old humidification filters and zeolite sheets as non-
flammable garbage.
16
Empty tray
Remove soiling
Float
Clean once every 2 weeks.
Humidification
filter set
Allow to sit
Lattices facing down
Reattach
About 6 months.
• Product name: replacement humidification filter (1 unit)
• Model: HV-FP5 for HV-50CXE
Separately sold replacement humidification filter includes
a humidification filter and zeolite sheet. Set the new hu-
midification filter and zeolite sheet to the currently used
filter frame.
Rinse
Lattice side