Table of Contents
Advertisement
About humidity setting mode, auto humidification mode, silent mode, continu-
ous operation mode
About the Humidity
Setting Mode
Humidity setting mode
Auto humidification mode
Silent mode
Continuous operation mode
The current humidity is displayed during humidification operation.
• Using lamps, the current humidity of the room is displayed as a guide.
• The humidity may differ depending on the area of the room.
• The current humidity will not be displayed during cluster ion operation.
• During continuous operation mode and silent mode, the unit will stop operate once the hu-
CAUTION
midity in the room reaches 80% or higher. Too much humidification may cause condensation
on windows and within closets.
Auto humidification mode will humidify the room while suppressing dryness of the room.
• Recommended for use while operating air conditioners and heaters as well as the flu sea-
NOTE
son.
• The humidity of the room may not rise effectively if the room exceeds the applicable floor
area (Page20) or when ventilating.
• The humidity setting is to be used only as a guide. The humidity will differ depending on the
area of the room and differences in the accuracy will also be noticed with other humidity
instrumentation.
• Vaporization may not perform effectively during rainy and cold weather.
• Some time is required for the humidification filter to sufficiently absorb water when using the
unit for the first time or when not using for an extensive period. In this case, humidification
may not perform effectively for some time after starting operation.
• Steam will not be visible since water is evaporated using a low temperature. However, this is
not a malfunction.
• A bubble appears in the tank, and has sound to supply water to the tray during operation.
Auto humidification
Silent Mode
Mode
When operating the unit at the desired humidity setting.
Using the humidity sensor, the unit will automatically switch opera-
tions between high, medium, low and off to adjust to the set humidity.
To maintain pleasant humidity.
Using dual (temperature and humidity) sensors, the unit automatically
switches operations between high, medium, low and off depending
on the room humidity while at the same time checking the room tem-
perature for fine humidity control.
Room temperature
0
16
18
65%
To operate the unit silently while sleeping, etc.
The volume of air and humidification discharged are suppressed for
silent continuous operation of humidification (low). (Heater OFF)
To operate the unit continuously.
The unit will perform humidification (high) operation continuously
(heater ON).
Continuous Operation
Mode
20
22
24
60%
26
33
55%
13
Hide quick links:
Advertisement
Table of Contents
