Operation - Sharp HV-50CXE Operation Manual

2
Oreparation
Power ON/OFF button
1
Press the Power ON/OFF button.
• The auto humidification mode (green), cluster ion lamp (green) and cluster ion sign (blue) will
light and the auto humidification mode operation and cluster ion operation will start.
• For about the first minute of operation, the humidity display lamp (green) will flash in the following
order:
(Checking of current humidity in progress.)
Press the Humidity Select button and select the desired operation.
2
The mode will change each time the Humidity Select button is pressed as
shown below.
When the cluster ion lamp is off:
40
(Green) (Green)
Humidity setting mode
When the cluster ion lamp is on:
40
(Green) (Green)
Humidity setting mode
When performing only cluster ion operation.
(Operation can be made with the tank empty.)
• Empty all water from the tray and tank.
Water remaining within the tank and tray will cause
humidification.
• Set the Cluster ion button to ON.
(Cluster ion lamp and cluster ion sign lit)
• Set the Humidity Select button to OFF.
(2 short beeps will be heard.)
(Operation display lamp off)
1
Beep
Auto humidification
50 60
(Green) (Green)
Auto humidification
mode
50 60 Auto humidification
(Green) (Green)
Auto humidification
mode
Humidity select button
2
Beep
Silent
Continuous
(Yellow) (Red)
Silent
Continuous operation
mode
mode
Silent
Continuous
(Yellow) (Red)
Silent
Continuous operation
mode mode
The ozone generated by the cluster
ion generator may have an odor. How-
ever, the amount of ozone generated
is very little and is harmless to the
human body, Furthermore, the ozone
decomposes quickly so it does not
accumulate in the room.
Off
Cluster ion operation
(humidifier off)
11