1.0 Features; 2.0 Specifications; 3.0 Introduction - Go Power GP-SWR-A Owner's Manual

___________________________________________________________

1.0 Features

The SWR-A Remote allows the switching on and off of the inverter from a remote
location. The remote displays the current status of the inverter through the
following LED lighting patterns:

Inverter is ON

Ignition Lockout is activated

Reverse Over-Ride Function (ROF) is activated

2.0 Specifications

SPECIFICATIONS
Input Voltage Range
Operating Temperature Range
Storage Temperature Range
Standby Current Draw
Applicable Models
Efficiency

3.0 Introduction

This is an ON/OFF remote control. The LED indicator light is located above the
ON/OFF button. A steady flashing red LED light indicates that the Inverter is ON.
A fast flashing red LED light specifies that the inverter is in Reverse Override
Function selection status. A slow flashing red LED light indicates that the inverter
is in Ignition Lockout Function selection status.
GP-SWR-A REMOTE
10.5-60VDC (Based on the battery input voltage of the inverter—it can be used
for 12V, 24V and 48V inverters)
-30°C – 70°C
GPSW-150/GPSW-300/GPSW-600/
GPSW-1500/GPSW-2000/GPSW-3000
GP‐SWR‐A
0-40°C
<40 mA
85-90%