Leds - HP ProCurve 1700-8 Installation And Getting Started Manual

Switch Overview
Switch Hardware Features

LEDs

The front panel of the switch provides status LEDs for system
monitoring. The following table details the functions of the various
indicators.
System LED
Power
(green)
Port LED
Link/Act
(green –
overlaid with
the port
number)
FDx
(green)
Spd
(green)
1-2
State Meaning
On The switch is receiving power.
Off The switch is NOT receiving power.
State Meaning
On The port is enabled and receiving a link indication
from the connected device.
Off The port has no active network cable connected,
or is not receiving link signal.
Flashing Indicates that there is network activity on the
port.
On Indicates the port is operating at full duplex
Off Indicates the port is operating at half duplex
On • Ports 1-7: Indicates the port is operating at
100 Mbps.
• Port 8: Indicates the port is operating at 100 or
1000 Mbps.
Off • Ports 1-7: Indicates the port is operating at
10 Mbps.
• Port 8: Indicates the port is operating at
10 Mbps.