Skip; Sorting Positions - Toshiba 40RL900A Owner's Manual

SETTING UP YOUR TV
i
Press OK to save.
j
Repeat for each position you want to tune.
k
Press EXIT when you have fi nished.
PLEASE NOTE
This television has direct channel entry if
the channel numbers are known.
Select the ATV Manual Tuning screen in
Step 3. Enter the Position number, the
System, then C for standard (terrestrial)
channels or S for cable channels and the
Channel number. Press OK to save.
To prevent certain channels from being viewed,
positions can be skipped.
a
Select ATV Manual Tuning from the System
Setup menu.
b
Use B or b to highlight the position to be
skipped and press OK to select.
ATV Manual Tuning
Pos. Channel
1 C2
2 C4
C5
3
4 C7
5 C12
6 C23
7 C27
8
C40
c
Press c to select Skip.
d
Use B or b to turn Skip on.
Press OK.
8 on the screen indicates a skipped
position.
ATV Manual Tuning
Skip: On
1 I A C
e
Press EXIT and repeat steps 1 through 4 to
set other positions if necessary.
Each position has to be individually selected.
To turn Skip off , repeat the procedure for
each position.
Skipped positions cannot be selected by P U
and P u or by the controls on the television
but can still be accessed by the number
buttons on the remote control.

Skip

Station
ABC1
ABC1
2
0

Sorting positions

Channels may be moved and saved to the position of
a
Select ATV Manual Tuning from the System
Setup menu.
b
With the list of channels showing, use B
or b to highlight the channel you want to
move and press c .
ATV Manual Tuning
Pos. Channel
2 C4
C5
3
4 C7
5 C12
1 C2
6 C23
7 C27
8
C40
c
Use B or b to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
d
Press C to save your move.
Repeat as necessary and press EXIT.
20
your choice.
Station
ABC1
ABC1