Programme Skip - Toshiba 36ZP46 Series Owner's Manual

Each signal will show on the television, if it is not
7
your VCR, press P or Q again to restart the
search.
When your VCR signal is found, press R to move
8
along to Station. With P , Q, S and R put in
the required characters, e.g. VCR.
Manual tuning
Station
I
0
OK : To store
MENU : To return
Press OK to store.
9
Repeat for each programme position you want
10
to tune or, press MENU to return to the list of
channels and select the next number to tune.
Press EXIT when you have finished.
11
This television has direct channel entry
P N
LEASE OTE
if the channel numbers are known.
Select the Manual tuning screen in Step 3. Enter the
Programme number, the System, then the
Channel number. Press OK to store.

Programme skip

To prevent certain programmes from being viewed, the
programme position can be skipped. The remote control must
be removed as the channels will still be available using
P and Q. The television can then be watched as normal
using the controls on the front, but the television will not show
the skipped programme position.
Select Manual tuning from the Set up menu.
1
Manual tuning
Prog. Sys.
I
0
I
1
I
2
I
3
I
4
I
5
OK : To select
Manual tune
Programme skip
39 0 VCR
M
EXIT : To exit
Channel Station
60 VCR
22 BBC1
28 BBC2
25 ITV
32 CH4
* 69
M
EXIT : To exit
continued
2 Use P or Q to highlight the programme position
to be skipped and press OK to select.
Press R to select Programme skip.
3
Use P or Q to turn Programme skip :On.
4
Press OK.
*
on the screen indicates a skipped programme
position.
Manual tuning
Programme skip :On
1
OK
MENU
Press MENU and repeat from Step 2 or press
5
EXIT.
Each programme position has to be individually
selected. To turn Programme skip off, repeat the
procedure for each position.
Skipped programme positions cannot be selected
by P ( P ) and P
f
the front of the television, but can still be accessed
by the number buttons on the remote control.
11
I
22 0 BBC1
*
M
: To store EXIT : To exit
: To return
(Q) or by the controls on
e