Table of Contents
Advertisement
Text services
This television has a multi-page text memory,
which takes a few moments to load. It off ers
two Modes of viewing text – Auto will display
Fastext, if available. List will save your four
favourite pages.
Selecting modes
The text character set will be automatically chosen by
the language setting in the Setup menu.
a
Press MENU / C c to highlight Setup icon.
b
Press B / C c to highlight Preferences icon
and press OK.
c
Press B or b to select Teletext, and then
press C or c to select Auto or List.
Preferences
REGZA-LINK Setup
Network Setup
Network Device Setup
Teletext
Network Lock
Panel Lock
Display Settings
AV Connection
Text information
The TEXT button:
To view text services press TEXT. Press again to
superimpose the text over a normal broadcast
picture and again to return to normal viewing.
Channels cannot be changed until text is cancelled.
The fi rst text page shown will be the initial page.
Any text page can be accessed by entering the 3
digit page number using the numbered buttons,
pressing the coloured buttons or pressing P U to
advance to the next page and P u to go back to the
previous page.
Sub-pages
The pages on the screen will dynamically update as
sub-pages are received.
If you open a page containing sub-pages, the sub-
pages are automatically displayed in sequence. To
quit automatic sub-page change, press C or c .
Once selected, the sub-page you are viewing will
be highlighted and, as the television loads any
additional sub-pages, the colour of the numbers
will change, indicating that these pages have been
loaded.
These sub-pages will remain available to view until
another page is chosen or, in normal TV mode, the
channel is changed.
If Fastext is available, four coloured titles will
appear at the base of the screen.
To access one of the four given subjects, press the
relevant coloured button on the remote control.
For further information on your particular text
system(s), see the broadcast text index page or
consult your local Toshiba dealer.
Auto
Off
Off
The four coloured choices at the bottom of the
screen are numbers – 100, 101, 102 and 103,
which have been programmed into the television's
memory. To view these pages, press the relevant
coloured buttons.
To change these saved pages, press the relevant
coloured button and enter the 3 digit number. This
number will change in the top left of the screen and
in the coloured highlight.
Press OK to save. Whenever OK is pressed, all four
page numbers showing at the bottom will be
saved and the previous ones will be lost.
NOTE: The video signal from the external inputs
(EXT-1 and EXT-2) is not saved.
If OK is not pressed, the selection will be forgotten
when the channel is changed.
Other pages may be viewed by entering the 3 digit
page number – but DO NOT press OK or these
pages will be saved.
57
Navigating pages using Auto
Navigating pages using LIST
TEXT SERVICES
Hide quick links:
Advertisement
Table of Contents
