Hitachi DH 30PC2 Handling Instructions Manual page 10

English
5. Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank)
Cutter (SDS-plus shank)
6. Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
7. Bolt placing operation with Chemical Anchor (rotation + hammering)
Standard socket
( )
on the market
8. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G), special screw and chuck wrench
Special screw
9. Drilling holes (rotation only)
Drill chuck (13VLD-D)
Chuck wrench
9
(SDS-plus shank)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
Drill chuck (13VLRB-D)
Chuck wrench
Chuck adapter (D)
(SDS-plus shank)
Chuck adapter (G)
(SDS-plus shank)