Problem
The machine
is noisy
The machine
jams
Intellectual Property
Please note that on disposal, this product must be safely
recycled in accordance with relevant National legislation
relating to electrical/electronic products. If in doubt please
contact your retailer for guidance
Cause
1. The machine must be lubricated.
2. Lint or oil have collected on the hook or
needle bar.
4. The needle is damaged.
Thread is caught in the hook.
Correction
1. Lubricate as described.
2. Clean the hook and feed dog as
described.
oil.
4. Replace the needle.
Remove the upper thread and bobbin
case, turn the handwheel backwards and
forwards by hand and remove the thread.
Lubricate as described.
CE - Authorised Representative
VSM Group AB, SVP Worldwide
Drottninggatan 2, SE-56184, Huskvarna, SWEDEN
31