Husqvarna Viking E10 User Manual page 17

BUILT-IN NEEDLE THREADER
The needle must be in the up position to
use the built-in needle threader. We also
recommend lowering the presser foot.
1a. Use the handle to pull the needle
threader down, catching the thread
under the guide.
1b. Push the needle threader all the way
the needle. A small hook will pass
through the needle eye.
in front of the needle, so the thread
catches into the small hook.
2a. Let the needle threader gently swing
back.
2b. The hook pulls the thread through
the needle eye and forms a loop
behind the needle. Pull the thread
loop out behind the needle.
3. Place the thread under the presser
foot and cut the thread.
Note: The needle threader is
designed to be used for size 70-120
needles. You cannot use the needle
threader for size 60 needles or
smaller, the wing needle, twin needle
or triple needle. There are also some
optional accessories that require
manual threading of the needle.
A
B
C
A
B
A
B
C
B
17