Unlocking Volume Control Fora Single Device; Unlocking All Volume Control - One for All Kameleon URC-9962 User Manual

U V
NLOCKING OLUME
D (I
EVICE NDIVIDUAL
1. Press and hold SETUP until the two bottom
IR segments flash twice. The Program Keys
will appear as SETUP flashes repeatedly:
2. Press VOL once. The Volume Lock
programming screen will appear:
3. Press VOLM once. Then press a device key
once (i.e., AUX, CBL/SAT, CD, TV, DVD, AUDIO,
VCR, or PVR) where you want the volume
controls unlocked. The two bottom IR seg-
ments will flash four times and the Program
Keys will appear again.
NOTE: The programming mode is still active as
denoted by the flashing SETUP key. If desired, use the
other Program Keys to continue programming (see
Table of Contents on page 2 for related sections).
4. If desired, repeat steps 2 through 3 (of this
section) for each device that you want volume
to be unlocked.
5. To exit programming, press HOME once. The
display will return to the last-selected device
menu screen
.
6. Now, after you select a device that has
volume unlocked, pressing VOL L, VOLM, or
MUTE will control the device's volume only in
its own mode.
C F A S
ONTROL OR
V U )
OLUME NLOCK
U
INGLE NLOCKING
(R
ESTORING
1. Press and hold SETUP until the two bottom
IR segments flash twice. The Program Keys
will appear as SETUP flashes repeatedly:
2. Press VOL
programming screen will appear:
3. Press VOL L once. The two bottom IR
segments will flash four times and the
Program Keys will appear again.
4. To exit programming, press HOME once. The
display will return to the last-selected device
menu screen
5. Volume will again be independently
controlled according to its default states
for all programmed devices.
U
SER
A V C
LL OLUME ONTROL
D S )
EFAULT ETTING
once. The Volume Lock
.
Changing Volume Lock 15
' G
S UIDE