System Setting Menu - Q-See QD6523ZH User Manual

Outdoor intelligent pan-tilt-zoom dome camera with 23x optical zoom and internal heater

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

EXAMPLE 1: SETTING A CRUISE

This example is based on using a QT-Series DVR without an attached PTZ

keyboard. Your DVR's specific commands may differ slightly. Please consult your

system's manual.

STEP 1. In your DVR's PTZ settings

window, select the Advanced tab

and then Preset 1.

STEP 2. Rotate the camera to the

desired position using the arrow

controls.

STEP 3. Click Save

STEP 4. Select Preset 2.

STEP 5. Rotate camera to desired

second location.

STEP 6. Click Save

You may repeat Steps 4-6 for additional

positions if desired.

STEP 7. While still in the Advanced

tab, click on the Setting button in

the Cruise column for Channel 1.

This will open a new window.

STEP 8. Click Add.

STEP 9. Double-click on the new

cruise setting to begin loading

your presets.

STEP 10. Click on the + button to

open the Preset pop-up window

and select your starting preset

point, speed and stop time.

Speed: 1-8 with 8 being the fastest

Time: This is the time the camera will stay pointed at this location.

STEP 11. Repeat for each preset - up to a maximum of 16 per cruise.

STEP 12. Click OK save your settings and close the windows until you reach

the PTZ Settings window. Click Apply to save all of the settings.

STEP 13. Open the PTZ controls from the Control Bar, select your cruise in the

pull-down and click

to begin.

EXAMPLE 2: SETTING A TRACK

An alternate method is to utilize the Track settings - also found in the Advanced

tab. Click the Track button for the right channel, use the directional controls to point

the camera at your desired starting point and then click Start Record. The DVR

will then record your movements, including delays at selected spots. Click Stop

Record to end. Clicking on Start Track in the PTZ control window will start the

camera on its track.

IMPORTANT! Preset 24 through 34 and 79 through 99 are reserved for

camera commands and cannot be used as preset points.

P.T.Z

Serial Port

Advanced

Preset

Cruise

Track

Setting

Default

Apply

Exit

All

No.

Zoom

Focus

Save

Iris

Speed: 5

All

Zoom

Start Track

Preset

Focus

preset 101

Start Auto Scan

Cruise

Start Cruise

Iris

Speed: 5

ADDITIONAL SETTINGS USING THE CAMERA'S ON-SCREEN MENU

The QD6532Z offers additional features that can be accessed through the DVR's

PTZ menu, but which are actually programmed on the camera itself.

Accessing the Menu

The following instructions are shown using a QT-series DVR.

STEP 1. Right-click on your screen to open the Control Bar.

STEP 2. Click on the PTZ Control icon.

STEP 3. Set the preset point (a)to 28 (95 may also be used)

STEP 4. Click the

to the right of the Preset pulldown (b).

STEP 5. The on-screen menu will appear. You can navigate through it using the PTZ

directional controls (c). Use the Iris + button (d) as "Enter" to make selections.

Use the right arrow in menus with multiple options.

Zoom

Focus

Iris

Speed: 5

The Menus

When the On-Screen Display is activated, a menu with six options will be displayed.

The five menus all have submenus and other options. Most functions are self-

explanatory in nature. Selected features will be covered below.

Back will take you to the previous menu

while Exit will close out of the menu.