Tape / Rdx Configuration - NEC Express5800 Configuration Manual

CONFIGURATION GUIDE
6.2

Tape / RDX Configuration

6.2.1 DAT / USB
Category
Controller
Cable
Required
Drive
1 bays available
6.2.2 RDX
Category
Controller
Cable
Required
Drive
1 bays available
NEC Corporation
–
NEC Express5800/GT110e
Product Name / Description
Internal USB Controller
1 x USB port or 1 x pin-header for front panel USB
Internal USB cable
1x Internal USB to 1x USB device
NOTE:
The cable is required to install USB tape drive only.
Internal USB cable
1x pin-header for front panel USB to 1x USB device and 1x front
panel USB port
NOTE:
The cable is required to install internal flash memory and USB
tape drive.
A USB tape drive occupies one front USB port.
Internal DAT (USB)
DDS4 / DAT72 / DAT 160, Native capacity 72 GB
NOTE: DDS1 / DDS2 /DDS3 format are not supported
Product Name / Description
Internal USB Controller
1 x USB port or 1 x pin-header for front panel USB
Internal USB cable
1x Internal USB to 1x USB device
NOTE:
The cable is required to install USB tape drive only.
Internal USB cable
1x pin-header for front panel USB to 1x USB device and 1x front
panel USB port
NOTE:
The cable is required to install internal flash memory and USB
tape drive.
A USB tape drive occupies one front USB port.
Internal RDX (USB)
Revision 4.0 – April 16, 2012
Part Number
(Standard)
K410-254(00)
K410-245(00)
N8151-78A
Part Number
(Standard)
K410-254(00)
K410-245(00)
N8151-105
20