NEC Express5800 Configuration Manual page 63

CONFIGURATION GUIDE
Revision Date
3.0 November 7, 2012
2.0 August 3, 2012
1.1 June 25, 2012
1.0 May 14, 2012
NEC Corporation
–
NEC Express5800/T120d
Description
New products added:
RAID Controller (1GB, RAID 0/1/5/6) / N8103-152
SAS Expander Card / N8103-166
Internal SAS/SATA Cable / K410-274(00)
200GB SSD / N8150-711
400GB SSD / N8150-712
Dust Proof Bezel with Sensor / N8146-28
Discontinued products removed:
100GB SSD / N8150-707
SAS Controller / N8103-104A
Internal LTO / N8151-77
Other:
Change the internal SAS cable to connect RAID controllers excluding
N8103-152 and drive cages directly
Add VMware ESXi 5.1 to the list of operating system supported
Support iSCSI protocol on 10GbE NIC
Update the maximum number of N8104-128 10GBASE Adapter on RHEL
Update OS support matrix
New products added:
Internal RDX / N8151-105
Internal USB Cable / K410-264(00)
Discontinued products removed:
Internal RDX / K8151-86
Other:
Add description for expansion slots
Correct wrong product name and part number for RAID card in section 4.2.10
Add maximum power consumption table
Remove 2.5-inch 10Krpm SATA drives
Other:
Remove CacheCade from the list for up to four hot plug 3.5-inch drive
RAID5/6 configuration
Initial release
Revision 7.0 – October 25, 2013
63