Internal Drive Configuration - NEC EXPRESS5800 Configuration Manual

CONFIGURATION GUIDE
4.2

Internal Drive Configuration

4.2.1 3.5-inch Drive with On-board SATA Controller
Category
Storage Controller
Cable
HDD Cage
HDD
4 slots available
NOTE:

On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.

On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.

Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.

3 TB HDDs are not supported with the on-board SATA non-RAID controller.

All hard drives within a RAID array should be of the same capacity.
NEC Corporation
–
NEC Express5800/R110d-1E
Product Name / Description
On-board SATA Controller
4 x SATA ports, RAID 0/1 capable
Internal SATA Cable
1x SATA to 1x SATA, 4 sets
3.5-inch HDD Cage
4 x 3.5-inch hot plug hard drive bays
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
3TB HDD
1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm
Revision 2.3, May 2012
Part Number
(Standard)
(Standard)
(Standard)
N8150-285
N8150-279
N8150-280
N8150-282
N8150-283
N8150-336
13