Creating A Mykey; Programming/Changing Optional Settings - Ford EXPLORER 2013 Owner's Manual

Hide thumbs Also See for EXPLORER 2013:
Table of Contents

Advertisement

70
• Vehicle speed minder of 45, 55 or 65 mph (75, 90, or 105 km/h).
Visual warnings are displayed followed by an audible tone when the
preselected vehicle speed is exceeded.
• Audio system maximum volume of 45%. A message in the audio
system is displayed when attempting to exceed the limited volume.
Also, the speed-sensitive compensated volume feature will be disabled.
• Always on setting. When this is selected, you will not be able to
disable AdvanceTrac, 911 Assist or Do not disturb feature (if your
vehicle is equipped with these features).

CREATING A MYKEY

Use the information display to create a MyKey.
1. Insert the key you want to program into the ignition. With a
push-button start (if equipped), put the Intelligent Access key in the
backup slot; see the Starting and Stopping the Engine chapter for
the backup slot location.
2. Turn the ignition on.
3. From the main menu within the information display, press OK or
the> button to navigate through the various screens. Select Settings
and then MyKey.
4. Press OK or the> to select Create.
5. When prompted, hold the OK button until you see a message
informing you to label this key as a MyKey. The key will be restricted
at your vehicle's next start.
After the key is successfully programmed, make sure you label it so you
can distinguish it from the admin keys.
You can also program optional settings for the key(s). Refer to

Programming/Changing Optional Settings.

Programming/Changing Optional Settings
Note: All programmed keys can be cleared within the same key cycle in
which a key was programmed, otherwise an admin key is required to
clear the keys. To clear all keys, refer to Clearing all MyKeys.
You can access the optional settings through the information display
control.
1. Turn the ignition on using an admin key.
2. Access the main menu and select Settings, then MyKey.
3. Use the arrow buttons to get to an optional feature.
4. Press OK or > to scroll through settings.
5. Press OK or > to make a selection.
2013 Explorer (exp)
Owners Guide gf, 4th Printing, November 2012
USA (fus)
MyKey

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents