Siemens Gigaset 4210 User Manual page 9

Gigaset 4015 Comfort, USA, A31008-G4015-B102-2-
Connecting the Base Station
Power supply unit
with cord
(110 VAC/60 Hz)
1
Insert the
G
small plug on
cord into pho-
ne jack
Place cord in
G
the base cable
channel,
insert power
G
supply unit
into wall out-
let.
Key to register
additional
handsets/Page
handsets.
2
Insert plug on the telephone cord into telephone jack on
G
base unit (clicks into place),
Place cord in cable channel on the bottom of the base,
G
Insert other end of plug into telephone jack on the wall.
G
The installation of the base unit should allow at least 8 inches
G
between the base and persons to be in compliance with FCC
RF exposure guidelines
G
G
G
Only use the power supply unit included as indicated on the
underside of the base.
Use the telephone cord supplied. Do not use any old cords.
Do not use an outlet controlled by a wall switch.
vorberei.fm
Setting Up the Telephone
Telephone jack with telephone cord
25.06.0
3