Route Guidance With Arrow Display; Lane Assistant Pro 3D; Map Display With Junction View - Becker GPS Navigator Operating Manual

Route guidance with arrow display

10
8
13
7
9
6
12
11
Vehicle speed and altitude above sea
1
level
Information box
2
Button for SituationScan
3
Power level/telephonestatus (de-
4
pending on the model)
Button for calling up the options
5
Button for Route overview (only with
6
the selected route active. If TMC
announcements are activated on the
route, a traffic jam warning sign
appears on the button.)
Driver alerts (depending on the
7
model)
Speed limit of the street currently
8
being driven on (display is not
available for all streets)
Next driving maneuver
9
Traffic lane recommendation (only
10
appears on some multi-lane roads;
green arrows = recommended
1
lanes)
2
Note:
3
If you follow the lane recommendation,
the next driving maneuver is possible
5
without changing lanes.
4
Current street or street to which the
11
next driving maneuver leads
Distance to
12
maneuver
Calls up volume settings
13
Lane Assistant Pro 3D (model dependent)
You can display an animated realistic
representation of the lane at many junc-
tions. To do this, switch on the function

Lane Assistant Pro 3D

der "The Guidance info button" on
page 64. At selected complex junctions
you will be shown exactly which lane you
have to change to. You can leave the
Lane Assistant Pro 3D again by touching
the display.

Map display with Junction view

You can display a detailed and realistic
view of the lane situation at many
motorway junctions.
the next driving
To do this, switch on the
function as described under "The
Guidance info button" on page 64.
If you are then directed through a motor-
way junction by the Navigation device,
you will see a corresponding display.
as described un-
> Follow the lanes indicated with the
arrows.
NAVIGATION MODE >>>
Junction view
87