Device Status Check - Glonex GLOCAM GC1 User Manual

13
GPS Log Route Tracker
Track driving route through the seperate GPS Tracker Viewer.
Information is stored in the GPS Log file.
Smart Phone Playback
Recorded images can be displayed through smart phones that can play
MP4 (H.264) format.
Parking Mode
The Red LED (Voice Recording "on") or Blue LED (Voice Recording
"off") is cross flashing at 3 second intervals. This reduces video rate to
10fps, which saves SD™ Card storage.
oice Recording ON/OFF
V
When unit is turned on, the Voice Recording is activated. To turn this
feature off, press the red Voice Recording Button.
Event information
When an event occurs, the time or G-Sensor value is saved into a
separate folder.
Speaker
(Voice Alert)
According to the camera operation, voice alerts will be announced
through the speaker.
Google Maps Integration
By being equipped with the GPS Google Maps Integration Module,
the route taken is recalled by the receiving satellite

Device Status Check

Check LED Flashing Display:
Status
Voice Message
Power on/recording starts
Recording starts with a beep
Video is recording
-
(voice recording ON)
Video is recording
-
(voice recording OFF)
Error in boot
Connect problem of other
hardware or sensor data
No card Inserted Insert SD™ Card
Card inserted incorrectly Check SD™ Card
Event Recording
Event
(G-Sensor detection)
Manual Recording
Manual Recording
(the Manual Recording Button)
Parking Mode ON Parking Mode ON
14
LED Classification
Purple Red
Blue
flashing
flashing
flashing
-
-
flashing
red/blue cross flashing
red/blue cross flashing
Red or blue is cross
flashing long