Troubleshooting; Appendix; Product Specifications; Memory Calculation - Glonex GLOCAM GC1 User Manual

19

Troubleshooting

Problem
1) Check that the power cord is securely inserted into the
Camera Power Error
camera and also securely inserted into the 12-V recepticle
The phone is not
(Cigarette Lighter)
turned on
2) Check that the harness power cable (if camera is hard
or the
wired to battery) is securely connected to the vehicle's fuse
Voice or LED is not
box.
operating
3) Upgrade the firmware after formatting the Memory Card.
1) Check that the card is properly inserted into the slot on the
Card Error camera.
2) Check that the card is an authenic, recommended SD™
Card.
3) Upgrade the firmware after formatting the Memory Card.
1) Check if there are any objects obstructing the cameras
GPS is not operating
ability to receive satellite signals, such as metal coating on
correctly.
the windshield.
Saved time and date are
2) Ensure that the location and angle of the unit are correct.
not correct.
3) Upgrade the firmware after formatting the Memory Card.
When the video is
Note: GPS may not work properly in closed environments
playing, the speed
such as: Tunnels, Parking Garages, around Tall Buildings,
doesn't display.
etc. Or if it has not been used in more than 3 days, if this is
the case it may take longer to resume normal operation.
Play Error
When the GC1 or GC2
Manager is running and
the performance screen
is not displayed.
PC Manager is opened
but the file doesn't play
Speaker Error
1) Check that the interior video is turned on. The Voice
When playing the Voice
Message will not work when the interior recording is turned
Message and it can't
off.
be heard.
2) Ensure that the power cord is securely inserted into the
There is static in the
camera and also into the 12-V receptical (Cigarette Lighter).
Voice Message.
Measures Remarks
If this problem
persists after
checking, please
contact Glonex for
service.
If this problem
persists after
checking, please
contact Glonex for
service.
Ensure that you are
not in areas that
could block the
signal. If so,
disconnect the power,
then reconnect.
If this problem
persists after
checking, please
contact Glonex for
service.
If this problem
persists after
checking, please
contact Glonex for
service.
If this problem
persists after
checking, please
contact Glonex for
service.

Appendix

Product Specifications

Power Consumption Weight
GC1: 86.2(W)X56.7(H)X52.4(D)
1.5W 45g
GC2: 100(W)X56.7(H)X52.4(D)
Camera GPS
1Camera / 0.3M pixel CMOS
Internal GPS Module
digital sensor
Voice REC. Event Resolution
Emergency button
(Collision, Q-accel, &
Internal MIC 640 x 480
Q-break detection)

Memory Calculation

2G 4G
Memory
2,048M 4,096M
Capacity
1,948M 3,996M
TTL Rec. time
2hour 4hour
GPS Log back data
72hour 72hour
- Micro SD™ Card (2GB~16GB) available
- 4GB/8GB (CLASS 4 or higher) recommended
20
Dimension Temperature
-20 ~ +50°
G-sensor Storage
Internal 3D
Memory Card
"G" sensor
Power Supply
DC 12V~24V (Cigar jack)
8G
8,192M
8,092M
7hour
72hour