Components Check List; Inserting/Removing The Sd Card - Glonex GLOCAM GC1 User Manual

7

Components Check List

GC1 or GC2
GLOCAM Camera
Cable Clips
Optional
Installation CD
The picture of components may differ from the items included in this package,
Some accessories may be modified or discontinued without notice.
Micro-SD™ USB Adapter
12-V Power Cord Micro-SD™ Card
Harness Power Cable
Inserting / Removing the SD™ Card
1. Insert SD™ Card into the slot.
2. Replace the cap over the end of the camera to protect
the device and card.
3. Connect the power cord into camera - LED will light up.
4. Remove the SD™ Card by pushing to eject it.
Caution: Make sure that the card is pushed in securely. If it is not
inserted correctly, it may cause a malfunction.
It is recommended that you use Class 4 or higher memory cards for optimal
camera performance.
Caution: Do not let card get wet or dirty. Do not touch metal end of card. These
can cause malfunctions of the card / camera.
Do not use the SD™ Card for any other purpose than with the camera. To do so
may cause loss of data and/or malfunction.
8