Nokia 6700 User Manual page 47

The Sent folder in the Messaging
application does not store messages sent
using Bluetooth connectivity.
To receive data using Bluetooth
connectivity, select Bluetooth
My phone's visibility Shown to all
>
receive data from a non-paired device or
Hidden to receive data from a paired
device only. When you receive data
through Bluetooth connectivity,
depending on the settings of an active
profile, a tone sounds, and you are asked
if you want to accept the message in
which the data is included. If you accept,
the message is placed in the Inbox folder
in the Messaging application.
Tip: You can access the files in the device
or on the memory card using a compatible
accessory that supports the File Transfer
Profile Client service (for example, a
laptop computer).
A Bluetooth connection is disconnected
automatically after sending or receiving
data. Only Nokia Ovi Suite and some
accessories such as headsets may
maintain a connection even if not actively
used.
Pair devices
Select Settings Connectivity
> >
Bluetooth.
Open the paired devices tab.
Before pairing, decide on your own
passcode (1-16 digits), and agree with the
user of the other device to use the same
code. Devices that do not have a user
interface have a fixed passcode. You need
the passcode only when you connect the
devices for the first time. After pairing, it
is possible to authorise the connection.
www.nokia.com/support
Cyan Cyan Magenta Magenta
Pairing and authorising the connection
makes connecting quicker and easier, as
you do not have to accept the connection
between paired devices every time you
establish a connection.
On and
>
The passcode for remote SIM access must
to
have 16 digits.
1 Select Options
device. The device starts to search for
Bluetooth devices within range. If you
have sent data using Bluetooth
connectivity before, a list of the
previous search results is displayed.
To search for more Bluetooth devices,
select More devices.
2 Select the device with which you want
to pair, and enter the passcode. The
same passcode must be entered to
the other device as well.
3 Select Yes to make the connection
between your device and the other
device automatic, or
the connection manually every time a
connection attempt is made. After
pairing, the device is saved to the
paired devices page.
To give a nickname to the paired device,
select Options
>
nickname is only displayed in your device.
>
To delete a pairing, select the device
whose pairing you want to delete and
Options > Delete. To delete all pairings,
select Options
>
currently connected to a device and cancel
the pairing with that device, pairing is
removed immediately, and the
connection is ended.
To allow a paired device to connect
automatically to your device, select
authorised. Connections between your
Yellow Yellow Black Black
Connectivity 47
New paired
>
No to confirm
Assign short name. The
Delete all. If you are
Set as