Camera; Capture An Image - Nokia 6700 User Manual

You can adjust and customise the ringing
tones, alert tones, and other device tones
for different events, environments, or
caller groups. The active profile is shown
at the top of the display in the home
screen. However, if the active profile is
General, only today's date is shown.
To create a new profile, select
Create new, and define the settings.
To customise a profile, select a profile and
Options > Personalise.
To change a profile, select a profile and
Options > Activate.The Offline profile
prevents your device from accidentally
switching on, sending or receiving
messages, or using Bluetooth connectivity
or FM radio; it also closes any internet
connection that may be in operation
when the profile is selected. The Offline
profile does not prevent you from
establishing a Bluetooth connection at a
later time, or from restarting the FM radio,
so comply with any applicable safety
requirements when establishing and
using these features.
To set the profile to be active until a
certain time within the next 24 hours,
scroll to the profile, select Options
Timed, and set the time. When the time
expires, the profile changes back to the
previously active non-timed profile. When
the profile is timed, is displayed in the
home screen. The Offline profile cannot be
timed.
To delete a profile that you created, select
Options Delete profile. You cannot
>
delete the predefined profiles.
www.nokia.com/support
Cyan Cyan Magenta Magenta

Camera

Your device has two cameras to capture
still images and record videos. A high
resolution main camera is on the back of
the device using landscape mode, and
lower resolution secondary camera is on
the front of the device using portrait
Options
>
mode. To activate the secondary camera
when the main camera is activated, select
Options Use secondary
>

Capture an image

Select > Camera. You can also press
the capture key to activate the camera.
Your device supports an image capture
resolution of up to 2592 x 1944 pixels
(5Mpix). The image resolution in this
guide may appear different.
To capture an image, use the display as a
viewfinder, and press the capture key. The
device saves the image in Gallery.
The toolbar provides you with shortcuts to
different items and settings before and
after capturing an image or recording a
video clip. Select from the following:
Switch to image mode.
>
Switch to video mode.
Select the scene.
Switch the video light off (video
mode only)
Switch the video light on (video
mode only)
Activate the self-timer (images
only).
Activate sequence mode (images
only).
Select a colour tone.
Adjust the white balance.
Yellow Yellow Black Black
Camera 23
camera.