Promate Revolt User Manual page 6


Use the headphones volume control to increase the sound level (only when use as a wireless
headphone).

The audio signal input level is too low. Increase the volume from the audio source of Hi-Fi, CD, or
TV, etc.

The connected audio/video equipment may not be in playback mode. Start playback on by the
equipment.

The headphones output level is set too low. Adjust the volume to a suitable level.
DISTORTION

Restart the Pairing process. Press the "Pair" button on the transmitter and the headphones for
3secs. The process is finished when both LEDs flash blue.

The headphone's batteries may be too low. Recharge the batteries.

Ensure that the volume knob setting is correct.

The headphones may be too far away from the transmitter.

The audio signal input level may be too low. Increase the volume from the audio source of Hi-Fi,
CD, or TV, etc.
WARNINGS
Battery:

Never use another type of battery to replace the rechargeable batteries. When the headphones
are not in use, switch OFF the headphones to avoid damaging the batteries.

The batteries must be fully charged when using for the first time. An initial 5 hours charge is
required to guarantee an acceptable service life for the rechargeable batteries. Always ensure
that the headphones are switched to the OFF position while the batteries are charging.

Replace only with the same or equivalent type.
Keeping the device out of the reach of small children:

The packing products and the plastic bags for the accessories are not toys.

The bag itself and those small fittings inside can cause suffocation. Do not attempt to
disassemble the device. No parts embedded can be replaced or repaired by users.

Only authorized dealers or maintenance centers can disassemble this product. For issues with
any parts including normal wear, break, or damages, please contact your dealer.

Keep the product away from rain or other liquids.