Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Promate Atom
Summary of Contents for Promate Atom
- Page 1 Atom ™ User Guide...
- Page 2 Introduction Sleek Multipoint Pairing Bluetooth™ Headset The Promate Atom headset is a remarkable Bluetooth™ device that is all but your imperceptible. Weighing next to nothing, the Atom clips to your ear and syncs via 3.0 +EDR Bluetooth™ to mobile device. It also comes with multi-point technology allowing you to connect two devices simultaneously.
-
Page 3: Getting Started
Getting started The atom contains the following parts: (1) Ear hook (2) Charging jack (3) On/off / MF Button (4) LED (5) Speaker (6) Microphone... -
Page 4: Charging The Battery
Charging the Battery For first time use, please charge the headset fully before using. 1. Plug the USB charger into the Atom. 2. Plug the other end of the USB charger into your PC USB or USB power devices. 3. The red indicator on the headset will be on. - Page 5 Bluetooth™. Please set the headset into pairing mode before making your mobile phone search for ‘Atom’. If no pairing is possible for a period of time (approximately 3 minutes), the headset will automatically leave pairing mode and go to the idle mode.
-
Page 6: Multipoint Pairing
Multipoint pairing Atom Headset supports multipoint pairing. This means the Atom can be paired and connected with 2 mobile phones at the same time. 1. Pair and connect the headset with the first mobile phone. (Please refer to the ‘PAIRING THE HEADSET’.) 2. -
Page 7: Making Calls
Making Calls Once the headset is successfully paired with your mobile phone, you can use it to make and receive calls. The headset can be used with voice dialing if your mobile phone supports this feature. Please consult your mobile phone’s manual for more information. 1. -
Page 8: Transferring Calls
When the headset is turned on and there is an incoming call, you will hear a musical tone. 1. Press the MF-button to answer the call. 2. Press the MF-button to end the call. 3. Press the MF-button for 2 seconds to reject the call. 4. -
Page 9: Adjusting Volume
Adjusting Volume You can increase/decrease the volume by increasing/decreasing the volume of your mobile phone. The volume of your headset will be adjusted automatically. Please consult your mobile phone’s manual for more information. Factory Reset To factory reset the headset, you will have to turn off the headset. Then press and hold the MF-button for 8 seconds. - Page 10 1. Ensure that the headset is charged, switched on, and paired with a Bluetooth™ mobile phone. 2. Ensure that the Bluetooth™ function is activated on your phone. 3. Check that the headset is within 10 meters (30 feet) from your phone and that there are no obstacles between the headset and the phone such as walls or other electronic devices.
Need help?
Do you have a question about the Atom and is the answer not in the manual?
Questions and answers