Wired Headphone Application; Troubleshooting - Promate Revolt User Manual

8. Wired Headphone Application

The headphone can be applied in wired mode. Simply connect the headphone and the audio source by
the supplied 3.5mm to 3.5mm audio cable.

9. Troubleshooting

NO SOUND

Ensure that the mains adapter is pushed fully into the power outlet and that its cable is properly
connected to the DC IN 6V connector on the transmitter.

Ensure that the headphones On/Off switch is switched to the On

The headphones battery charge level may be too low. Recharge the batteries or replace them
with fully charged batteries.

Ensure that your DVD, TV set, Hi-Fi system or audio component is switched on and set to a
channel that broadcasts an audio signal.