Charging The Batteries - Promate Revolt User Manual

Press the Power button on the headphone for 3 seconds to turn the wireless function on. The
1.
Blue LED light will flash.
The headphones are now linked up with the transmitter and the Blue LED light will be solid blue.
2.
6. Installation
To start up this system, please take following steps:

Connect the power adapter between the transmitter and power outlet. The LED on the
transmitter will light up green.

Connect the transmitter with your audio source, turn the source ON, and then the LED will turn
from Green to Blue.

Turn on the headphone receiver by pressing the ON/OFF switch, and then LED will then flash in
blue.

If the LED on the headphone turns OFF immediately, recharge headphones.

When the audio link is established, the LED will turn blue.

If the LED on the headphone still flashes in blue, please check with troubles shooting processes.
To pair the Headphone receiver with the transmitter, please take the following steps:

Press the Pair button on the transmitter and the headphone simultaneously for 3 seconds.

The blue LED will begin to flash.

The LED will change to solid Blue when pairing process is finished.
To activate auto stand by and auto shut off, please take the following steps:

The transmitter will automatically turn to stand by mode after approximately 4 minutes if there
is no audio signal, or the signal that it receives from the audio source is too weak for proper
reception.

If however the signal returns to an acceptable level, the transmitter will automatically switch
back on.

The headphone receiver will automatically shut off if there is no signal from the transmitter after
15 minutes.

7. Charging the Batteries

Switch OFF the receiver headphone.
1.
To recharge the headphone batteries, place the headphones onto the transmitter, and ensure
2.
that the charge contacts touch the transmitter's charge pins. The LED on the headphone will
light up in red, when charging is finished the headphone LED will turn green.
Charge the batteries in the headphones for 5 hours when using for the first time. The red
3.
indicator light will be in solid red during battery charging.