Important Safety Measures
1) Please read this manual before installing the equipment.
2) Please follow all warning notices on the equipment and in the manual.
3) Please only use accessories which are recommended by your dealer or ones
that are listed at the end of this manual.
4) Please protect cables well, especially near connection points.
5) Prevent corrosive type liquids from coming in contact with the dome.
6) Do not install equipment on unstable surfaces or structures. High winds can
cause a poorly installed dome to become a hazard.
7) Contact customer service @ 1-800-774-0284 for maintenance issues.
8) The input voltage of this equipment is 24VAC. Please only use the power supply
that comes with the unit.
1. Decoder PC Board
Lens Control
cation IC
Communi
Control
IC
itch S1
Sw
Power LED
Power Supply of Camera
PCB of Decoder (7" Dome)
Switch Power Access
B-/A+/AC24V/AC24V
3