Regza-Llnk@ Input Source Selection; Volume And Mute Controls Of Audio Receiver; Other Regza-Llnk@ Functions - Toshiba 40E200U1 Owner's Manual

Top Menu Accesses the top menu of a OVO.
If a connected HOMI device starts
playing video or audio, the TV will
automatically switch to the appropriate
HDMI input.
TV Auto
Input Switch
When the
Enable REGZA·lINK
and each item in the
REGZA-liNK Setup
menu are set to
On,
the following
functions will be enabled.
Note:
• To use this function:
- Set Speaker Preference to Audio Receiver in
the REGZA-LiNK Setup menu.
- Confirm that
a
connected REGZA-LINK device
(such as OVO player, etc) is selected for the
Audio Receiver input source.
• You can also use this function when the audio
receiver is connected to the TV's DIGITAL
AUDIO OUT terminal (not HOMI connection).
In this case, select a digital audio input mode
on the Audio Receiver.
• These functions depend on the device
connected.
Other REGZA-LlNK@ functions
Accesses the menu of a OVO.
Accesses the setup menu of a OVO
player.
Accesses the top menu of the selected
device.
Turns the select device on and off.
Accesses the contents list when you press
@.
At this time, the
REGZA·lINK Player
Control
menu will disappear.
Power
Menu
Root
Menu
Setup
Menu
Contents
Menu
3
Press
A
or
T
to select the item you want to
control and press
@.
Note: When you turn on the Audio Receiver,
change its input source, or adjust the sound
volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to
output the sound from the TV speakers.
To set the REGZA-LINK® Setup:
1
From the
Setup
menu, highlight
REGZA·lINK
Setup
and press
@ .
2
Press
A
or
T
to highlight
Enable REGZA·lINK.
3
Press .... or
~
to select
On.
Note:
• These functions depend on the devices that are
connected.
• The
REGZA-lINK Player Control
item will be
grayed out in the following conditions:
-A non-HOMI input is currently selected.
- The
Enable REGIA-LINK
item is set to Off.
- The connected GEG device is not
a
playback or recording device.
REGZA-LlNK@ input source selection
If a REGZA-LINK device with HOMI switching
capability (e.g. Audio Receiver) is connected to
the HOMI input, you can select another REGZA-
LINK device that is connected to the master HOMI
device using the TV's INPUT button. See page 29 for
details.
VOLUME and MUTE controls of Audio
Receiver
With your TV's remote control, you can adjust or
mute the sound volume of the Audio Receiver.
•1:tJ ~
adjust the volume level.
•
~
turns off the sound.
TV Auto
Power
Device Auto
Standby
Speaker
Preference
If a REGZA-LINK device is turned on,
the TV turns on automatically.
If the TV is turned off the TV will send
a message to tum off all of the REGZA-
LINK devices connected to the TV.
From this item, you can set your audio
output preference to the TV speakers
or the audio receiver speakers. When
this item is set to Audio Receiver,
the TV remote can be used to adjust
or mute the volume of the audio.
This item will be grayed out unless
a REGZA-LINK compatible audio
receiver is connected.
(continued)
49
I