Connecting A Vcr And Antenna. Cahle Tv Or Camcorder - Toshiba 40E200U1 Owner's Manual

_ ...
--_
..
---
.....
Connecting a VCR and antenna, Cable TV or Camcorder
. ' , ,
..
,
..
_ "
_- .
-
,.
.
'--,,-_.
._--
..
'
.
Camcorder
TV back panel
You will need:
• coaxial cables
• standard AN cables
- If you have a mono VCR, connect UMONO
on the TV to your VCR's audio out terminal
using the white audio cable only
• standard audio cables (If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TV
To view the antenna or Cable signal:
Select the
ANTICABLE
video input source on the TV
*
To view basic and premium Cable channels:
Turn OFF the VCR. Select the
ANTICABLE
video
input source on the TV* Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
I
14
From Cable TV or
From Cable
TV
antenna
To view the VCR:
Turn ON the VCR. Select the
VIDEO 1
video input
source on the TV *
To view the camcorder video:
Select the
VIDEO 2
video input source on the TV*
*
To select the video input source, press INPUT on the
remote control (I@' page 21).
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs,
and other materials is prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.