Toshiba 40E200U1 Owner's Manual page 19

Note:
• The PC audio input terminals on the TV are shared
with the HDMI-1 analog audio input terminals (1&
page 44).
• Some PC models cannot be connected to this TV
• An adapter is not needed for computers with a
compatible mini D-sub 15-pin terminal.
• Depending on the DVD's title and the
specifications of the PC on which you are playing
the DVD-Video, some scenes may be skipped or
you may not be able to pause during multi-angle
scenes.
• Signal names for mini O-sub IS-pin connector
I R 6
Ground II Reserved
2 G 7
Ground 12 SDA
3
B
8 Ground
13
H-sync
4 Reserved 9 5V 14 V-sync
5
Reserved
10 Ground 15 SCL
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HOMI terminal on the
TV, use an HOMI-to OVI adapter cable and analog
audio cables.
If connecting a PC with an HDMI terminal, use an
HDMI cable (type A connector). Separate analog
cables are not necessary
(I@'
page 16).
TV back panel
PC IN"""'_ _ HOMIIN-,
Hom, I CQJiJIlII_ _"
PC audio
cable
Note:
• The edges of the images may be hidden.
• If receiving a 480i (HOM/), 480p (HOM/), 720p,
1080i, or 1080p signal program, Native mode
scales the video to display the entire picture within
the borders of the screen (i.e. no overscanning).
Computer
PC audio
output
[]1~--..1
The HDMI input can accept and display VGA, SVGA,
XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz),
nop
(60Hz), I080i (60Hz), and IOSOp (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 57.
19
I