Energy Saver (Standby Mode) - Horizon Fitness EX-69 Owner's Manual

ENERGy SAVER (STANdby MOdE)

This elliptical has an energy saver mode. The display will automatically enter standby mode (energy saver mode)
after 15 minutes of inactivity. Almost all power for the elliptical will be off except for some circuits that are needed
to detect a key press or RPm detection, indicating the console should "wake up". This feature can be turned on or
oFF by entering the engineering menu.
To enter the engineering menu, press and hold the
menu to Eng2. Press EnTER to select. use
seconds to exit Eng2. Press and hold sToP again for 3-5 seconds to exit the engineering menu.
The EX-69 comes with standby mode on. The EX-79 comes with standby mode off.
buttons for 3-5 seconds. use
to select sTAndBY on or oFF. Press and hold sToP for 3-5
to navigate through the
33