Table of Contents
Advertisement
Labeling video input sources
These input labels are shown in the input selector. You can label
video inputs according to the devices you have connected to the
a
In the PREFERENCES menu, highlight AV Connection
Q
and press
.
b
B
b
Press
or
to highlight Input Labeling and press
Q
.
Input Labeling
Input
Label
EXT 1
EXT 2
EXT 3
EXT 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4*
PC
* Only available on RV/XV series.
c
B
b
Press
or
to highlight the item you want to label,
C
and then press
or
DVD, Game, PC, Recorder, Satellite or VCR, or
press the GREEN button to select User Input.
NOTE: When User Input is selected by pressing the
GREEN button, the Software Keyboard window will
appear. Input the desired characters (10 characters or
less) by using the Software Keyboard (see page 36)
or using the number buttons for a number input. To
save your settings, press the BLUE button.
d
Repeat step 3 for other video inputs.
Woofer setting (XV/MV series only)
When an active Sub-Woofer is connected to the Woofer out
connection on the back of the television, set the Woofer setting
to External.
a
In the AV Connection menu, press
Woofer.
b
C
c
Press
or
to select External.
TV.
--
--
--
--
--
--
--
--
--
c
to select --, Amplifier, Cable,
b
to highlight
In order to receive sound from a connected PC, plug the audio
cable into the back of the television (as shown in the
'Connecting a computer' section), and then use the PC/
HDMI 3* Audio setting.
a
In the PREFERENCES menu, press
Connection is highlighted, and then press
b
Highlight PC/HDMI 3* Audio, and then use
select the PC option.
NOTE: Selecting the PC option will force HDMI 3*
Audio to Digital mode.
* PC/HDMI 2 for MV series
HDMI 3* Audio
If the connected HDMI source does not support digital audio,
plug the audio cable into PC/HDMI 3* (AUDIO) on the back
of the television (as shown in the 'Connecting an HDMI
device to the HDMI input' section), then use the HDMI 3*
* On MV series, this is HDMI 2.
a
In the AV Connection menu, press
HDMI 3 Audio and using
b
Then highlight HDMI 3 Audio, and using
select Auto or Analogue.
RV/XV series menu example
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
EXT 2 Input
Woofer
Digital Audio Output
If the sound is absent, try selecting a different setting.
NOTE: HDMI 3 (HDMI 2 for MV series) supports digital
and analogue sound, HDMI 1, HDMI 2 and HDMI 4
(HDMI 1 and HDMI 3 for MV series) are digital sound
only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).
59
CONTROLS AND FEATURES
PC Audio
b
until AV
Q
Audio setting.
b
to highlight PC/
c
select HDMI 3.
C
HDMI 3
Auto
AV
Internal
Auto
.
c
to
®
or DVI
c
or
Advertisement
Table of Contents
