Setting Up The Network; Wireless Setup - Toshiba RV73* Digital Series Manual

Setting up the Network

You can select the Network Type.
a
In the PREFERENCES menu, highlight Network Setup
Q
and press .
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Panel Lock
Display Settings
AV Connection
b
B b
Press or to highlight Network Type, and then
C c
press or to select Wired or Wireless.
Network Setup
Network Type

Wireless Setup

Advanced Network Setup
Network Connection Test
NOTE: If the Dual Band WLAN Adaptor is not
connected, Wireless cannot be selected.
c
If you selected Wired, see "Advanced Network Setup"
on page 35.
Wireless Setup
NOTE:
• This feature is grayed out when the Dual Band WLAN
Adaptor is not connected or Network Type is set to Wired.
• Continued connection of AP (Access Point) is not guaranteed.
The connection may be disconnected while watching TV.
• Do not remove the Dual Band WLAN Adaptor when
Network Type is set to Wireless or wireless communication
is active.
There are 3 methods for Wireless Setup:
Easy Setup (WPS)
If the AP supports WPS, this method can be used.
• WPS (Wi-Fi Protected Setup™) is an industry standard designed
to make connection of wireless LAN equipment and security
setup easy. WPS will automatically configure all wireless settings.
Assisted Setup (setup by using the AP's notification
information)
Network Name, Authentication, and Encryption are decided
based on information from the AP. You will manually set the
Security Key.
Manual Setup (manual input of all settings)
Easy Setup using PBC (Push Button Configuration)
a
b
c
Auto
Off
d
e
f
g
Wired
To cancel searching for the AP:
Press RETURN while searching for the AP. A message
will appear, and then press C or c to select Yes and
press Q.
Easy Setup using PIN (Personal Identification
Number)
a
b
c
d
e
f
g
33
CONTROLS AND FEATURES
In the PREFERENCES menu, highlight Network Setup
Q
and press .
B b
Press or to highlight Wireless Setup, and press
Q
.
B b
Press or to highlight Easy Setup, and press
Wireless Setup
Easy Setup
Assisted Setup
Manual Setup
C c
Press or to select PBC.
b
Press to highlight Start Scan, and press
Following the on-screen instructions, push the
appropriate button on your AP.
When a window reporting that the setup is complete
Q
appears, press .
In the PREFERENCES menu, highlight Network Setup
Q
and press .
B b
Press or to highlight Wireless Setup, and press
Q
.
B b
Press or to highlight Easy Setup, and press
C c
Press or to select PIN.
b
Press to highlight Start Scan, and press
B b
Press or to select the desired AP and press
NOTE: Check the MAC address on the label of the AP
or in the manual, and select your AP.
When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup. When a message displays to
report that the setup is complete, press
Q
.
On
Q
.
Q
.
Q
.
Q
.
Q
.