Table of Contents
Advertisement
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions.
ILLUSTRATION SHOWS THE XV MODEL.
POWER switch
(Full Power
Down Option)
ORANGE LED - Programme
timer set (digital only)
RED LED – Programme timer
Active (digital only)
GREEN LED – On Timer set
Switching on
If the RED LED is unlit, check that the mains plug is connected
to the power supply and press the
left side of the television to switch the television on. If the
picture does not appear, press
take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
control. To view the television, press
take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory
settings. The factory settings are for energy saving.
Turning the television off at its mains supply, or un-plugging
it, will cut energy use to nearly zero for all televisions. This is
recommended when the television is not being used for a
long time, e.g. when on holiday.
Reducing the brightness of the screen will reduce energy use.
Energy efficiency cuts energy consumption and thus saves
money by reducing electricity bills.
NOTE: Putting the television into standby mode, will reduce
energy consumption, but will still draw some power.
Using the remote control
Press MENU on the remote control to display the menu.
The menu appears as a list of five topics. As each symbol is
C
c
selected by pressing
or
remote control, its respective options will appear below.
RED LED – Standby
GREEN LED – Power on
!
(POWER) button on the
1
on the remote control; it may
1
on the remote
1
again. The picture may
on the navigation ring on the
Standby
SD card slot (XV/MV series only)
To access photo files
COMMON INTERFACE
The Common Interface is for a Conditional
Access Module (CAM).
Contact a service provider.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, where some items are not
available in a mode they will appear greyed out.
To use the option, press
move up and down and press
setting. Follow the on-screen instructions. The functions of
each menu are described in detail throughout the manual.
Using the controls and connections
To alter the volume press –
To alter the programme position press
I
i
Press MENU and
,
,
options.
Press MENU to finish.
The Photo Viewer feature provides access to photo files stored on
a USB storage device or SD memory card (XV/MV series only).
NOTE: The USB socket has limited functionality, and Toshiba can
take no responsibility for damage to other connected equipment.
The USB 2 socket has to be used with the "TOSHIBA Dual Band
WLAN Adaptor WLM-10U2" in order to access a wireless
network (sold separately).
You must use the TOSHIBA Wireless LAN device to ensure
correct operation of this feature. This feature is available only
when the "TOSHIBA Dual Band WLAN adaptor" is used.
NOTE: As of Mar. 2010, the TOSHIBA Dual Band WLAN
Adaptor is not licensed to be sold in Russia.
To select an external input, press
source is selected.
Please always refer to the owner's manual of the equipment to
be connected for full details.
13
CONNECTING YOUR TV
USB 1 Photo Viewer
HDMI 4 INPUT (On MV
series this is HDMI 3.)
INPUT 4 (EXT 4)
USB 2 Photo Viewer/
Wireless LAN adaptor
ready for a home
network
B
b
and
on the remote control to
C
c
or
to select your desired
2
+.
b p B
.
U
u
or
to control the sound and picture
o
until the appropriate input
Advertisement
Table of Contents
